Ürün No. 27601
SLP CS K
Calcium silicate interior insulation wedge for wall and ceiling connection areas
Ürün varyantları
İndirilebilir Dökümanlar
Broşürler
Field of application
- Mould control and prevention in existing buildings
- Implementation of the hygienic minimum heat insulation level in existing buildings
- Improving the room climate by increasing the wall surface temperature
- Compensation of thermal bridging effects in ceiling and wall connection areas
- Optical correction of butt joints
Properties
- Thermally insulating and mould inhibiting
- Water vapour permeable
- Capillary-active
- Thermal conductivity (nominal value) approx. 0.07 W/(m*K)
- Reaction to fire class A1 (non-combustible)
- Substrate requirements: The substrate must be clean and capable of bearing a load. The substrate must be level.
- Preparations: Level off and even out highly uneven substrates – use SP Level to close up joints and even out surfaces.
- Pre-wet the substrate. Apply SLP Fix as a scratch coat on the rear face of the board and on the substrate. Using a toothed spatula, apply SLP Fix wet-on-wet to the rear face of the panel and to the substrate. Position and press on the boards from the bottom up. Align using a floating rule.
- Mark the desired dimensions on the board. Cut using a jigsaw or hand-held circular saw. Rework the cut edges with a rasp or file if necessary. Avoid cross joints. Make sure that full-surface bonding is achieved.
- Cutter knife and jigsaw
- Dry and frost-free.
- 4 panels/m²
- Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately. The relevant test certificates must be observed when planning and carrying out work.
- The product must be disposed of in accordance with the official regulations.